3D Water Drop Candle Molds DIY Perfume Soap Candle Making Resin Silicone Moulds Art Home Decor Aromatherapy Candle Moulds

Description

Material: Silicone

Color: white/transparent

Size: as picture show

Uses: DIY scented candles, plaster, chocolate, etc.

Scope of application: Safe to use in the refrigerator

Features: Durable, temperature-resistant food-grade silica gel, easy to demould, easy to demould, impermeable and easy to clean.

Note:

1.Manual measurement, the size will have an error of 0.5-2mmsubject to actual size.

2.Due to the light and screen difference, the item's color may be slightly different from the pictures.

3.The colors may vary depending on the batch.

About Candle Mold !!!

1. Question: How do i know what size wick i would need for this please
Answer: You can choose the length of the candle wick according to the height of our candle mold. Please refer to the size of the product picture, hope it will be helpful to you.

2. Question: How do I take wax out the mold without damaging the wax or the mold
Answer: Slowly Twist the molds, you can pull and flip it from the inside to the outside. Be sure to catch the wax when you remove it out of the mold.

3. Question: Is there a hole for the wick to come through the top and how do you do it so the wax doesn't leak
Answer: No, there is no hole for wick on mould. You can pierce it with a needle, along with the candle wick. As this torso soy wax mold is elastic, it will not leak.

4. Question: How do I put a wick in this to make a candle Surely if I poke a hole in the mold the wax would drip out
Answer: Hi, it doesn’t drip out. But the whole needs to be precise not too big. As silicone mould is elastic, it will not leak.

5. Question:Besides making candles, can it be used for other purposes
Answer: Of course, I can use it for soy wax, resin, jesmonite, soap,etc. It has a wide range of uses and you can freely DIY.

6. Question: How do you add a wick to this mould Do you puncture the top to post it through
Answer: You could put a small hole in the top of the candle mold, put down the candle wick, and then put the liquid wax in, wait for the candle to harden before demolding, hope our advice can help you.