Boysen Traffic Paint Alkyd / Reflectorized 4 Liters (Gallon) White Yellow Black

100% Original
Size: 4 Liters (Gallon)

Product Details:
BOYSEN Alkyd Traffic Paint
BOYSEN® Alkyd Traffic Paint is a quick-drying, alkyd-based marking paint with excellent adhesion and durability.
Principal Uses:  It is designed for use on street markings, curbs, and other areas where traffic lanes and safety zones are marked.
Finish:  Matte
Dry Time:
Touch: 1 hour 
Recoat: 8 – 12 hours 
Theoretical Coverage Per 4-Liters: 20 – 25 sq. m.
*Depending on surface texture and porosity
Tinting: Do not tint.
Thinning Solvent: BOYSEN® Paint Thinner B-0340
Clean-Up Solvent: BOYSEN® Paint Thinner B-0340
Application: By brush or roller
Available Colors:
B-1901 White 
B-1961 Yellow
B-1991 Black
Surface Preparation:
Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Remove oil and grease by using detergents or degreasers. Painting over roughened concrete surfaces is recommended to improve adhesion of succeeding coats.

Product Details:
BOYSEN Reflectorized Traffic Paint
BOYSEN® Alkyd Reflectorized Traffic Paint is an alkyd-type paint specially developed to resist the rigorous environment encountered on roads, pavements, and parking lots. It forms a durable film that offers good wear resistance and better reflective bead retention for safety markings.
Principal Uses: It is a reflectorized variant to the alkyd-based traffic paint for use on road markings and pavement linings.
FINISH: Flat
DRY TIME:
Touch: 1 hour
Recoat: 4 – 6 hours
Theoretical Coverage Per 4-Liters: 20 – 25 sq. m. 
*Depending on surface texture and porosity
Tinting: Do not tint.
Thinning Solvent: BOYSEN® Paint Thinner B-0340
Clean-Up Solvent: BOYSEN® Paint Thinner B-0340 
Application: By brush
Service Conditions: It is ideal only on areas in direct contact to wheel traffic; otherwise, the reflectorized effect will not manifest. Mix the paint thoroughly to avoid settling of glass beads.
Available Colors:
B-19-101    White               
B-19-161    Yellow                         
B-19-191    Black
Surface Preparation:
Concrete Surfaces
Allow new concrete to dry for 14-28 days under normal weather conditions before painting. Remove oil and grease by using detergents or degreasers. Painting over a roughened concrete floor is recommended to improve adhesion of succeeding coats.