C type Car Buffer Shock Absorber Rubber Spring Buffers AMT POWER CUSHION BUFFER Damping Rubbe

Description
Type:Rubber Buffer C
Size (Dia. x L): Approx. 13.5 x 13.2x 5.5cm
Color: Red
Material: Rubber

Function Introduction
1. Effectively solve problem of springs weakness when heavy load & improve performance of shock absorber.
2. Improve driving comfort and more stable during curve corner.
3. Reduce pumping of absorber when passing through road hump or yellow line.
4. Reduce noise and vibration during traveling
5. Protect shock absorber and suspension system to avoid oil leak.
6. Extend absorber life more than 2 times.
7. Improve braking efficiency.

Installation
1. It can be installed in the 4S shop. Park the car on a flat surface before installation, and prepare the buffer rubber,
wheeljack (if the condition is more convenient on the rack),
soapy water (can also be replaced by detergent dilution water);
2. Lift the car body of the mounting part with the wheeljack and the spring is stretched for easy installation.
You can fully see the shock absorber spring and no need to rise too high;
3. Spray the soapy water to clean the spring (mainly remove the sand stain on the spring surface), and also spray some soapy water on the cushioning rubber (sufficient lubrication will make it easier for the spring to be seated and calibrated).
4.After installation, thoroughly clean the soapy water to prevent car safety parts – the shock absorbing spring rusts and breaks or causing human injury;
5. Install the cushion rubber in the middle of the spring.
After the wheels are installed, put down the car body and confirm that the spring is inserted into the cushion rubber.

Application
Gap Between Spring: 27mmm
Thickness of Spring: 10mm
Diameter of Spring: 131mm