For CD400 digital Kit Tachograph truck Tacho Programmer Kit Tool KIT universal truck Commercial 3

Item Description:
TACHOGRAPH PROGRAMMER (TACHO) CD400 designed for verification, calibration and configuration of control devices when installed on vehicles. The device allows you to define the W figure determination on measuring track or rolling road, K figure measure, can be used as speed simulator for the when checking the speedometer and.
Basically, a is a device that measures and records the speed and distance driven by a vehicle. The data are recorded in the form of graphics on a paper disk.The new digital record those data on its embedded memory and also on the smartcard of the driver. The programmer CD400 calibrates and programs all analogue and digital .
CD400 Supported :Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.Digitals: DTCO 1381 (DTCO2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4.A Workshop Card is required to cluster calibration the digitalCD400 Functions:W figure determination on measuring track (with optional photo-cell) or rolling road.K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.Parameter programming.Activation and deactivation of IMS (Independent Motion Signal).Activation and deactivation of VDO counter.reset and (mileage correction).Speed simulation and customizable automatic test diagram.DTCS reading (Digital) and erasing.Sensor pairing (KITAS activation).Clock test.Workshop card's PIN recording and input through CD400.CD400 Advantages:No power connection nor battery charging required, the only tester powered by the itself.Compact size, the smallest tester on the market.User friendly, clear 4 lines menus, no training required.Automatic model detection on power on.Double accuracy of the W factor measure on track by detecting half pulses.The only tester being able to reset the and change the sender type on the VR2400.Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC.CD400 Technical Specifications:Graphic FSTF LCD Display: (100 x 32 pix. / 4 lines x 20 char)White LED backlightSize: 150 x 100 x 45 mmSupply voltage: 9 to 30 VDCSupply current: 12mACase: green-blue ABS (IP40).Operating temp: -20…+70°CWeight: 155gSoftware upgrade process:1. Download and install the CD200-ISP software: setup-CD200-ISP-V1-2.zip2. Use the upgrade cable (CA-RS232-1) to connect the CD400 to the serial port of your computer.3. Start the CD200-ISP software.4. Select the COM port.5. Select. hex file.6. Click the “Program” button.7. Use the dash cam, DC adapter (9V to 30V) or internal 9V battery to switch the CD400 power supply.8. Wait for the progress bar to complete.