ZJCGO Car BSD Radar Warning System Blind Spot Detection Safety Driving Alert for Chevrolet Trai Y

Product Introduction:
If you could tell us the model and year, that would be great. In addition, we would like a photo of the original interior rearview mirrorThank you for choosing our blind spot detection system, which is a safe driving blind spot assistance system that detects moving objects within 3 to 10 meters of the rear side with two 24G/72G HZ mmwave radars mounted on the rear bumper. The LED light lights up to alert the driver when the rear side moves the object into the set warning area. At the same time, when the moving object enters the sensing area set by the radar, the same side turn signal is turned on(judged to change lanes), the same side LED flashing rapidly, or sound drop three-tone prompt, warning the driver, then the rear has a moving object close, at this time the lane danger, to prevent danger.
Suitable for cars:
for Chevrolet Trailblazer 2020 2021 2022 2023 2024(Supports customized mirrors for all car models. If you send the original mirrors to my factory, our engineers will customize the laser warning light pattern for your mirrors. However, the product price remains the same, and you only need to be responsible for shipping the mirrors and any possible customs duties.)
Technical parameters:
1 Working voltage DC 9 ~ 16V2 Working current DC12V 430MA±10MA3 Working temperature -30 ° C ~ +80 ° C4: Static current consumption 1mA5: Waterproof rating IP666: Speed adaptation range ±120KM/hour7: Warning range 3 to 10 meters behind the side8: Warning method sound and LED lighting9: Startup mode start with ACC
Two mainstream types
1. Lens display, prompt light installed on the lens.2. Display in the car, with a warning light displayed on the triangular window inside the car.
LCA lane change assistance
BSD blind monitoring system
AOA Active Overtaking Warning
B-pillar blind spot following warning
RCTA reverse crossing warning
DOW door opening warning (optional)
Probe installation and calibration:
Note: Radar signals cannot penetrate metal and are easily interfered by fluorescent lights.Please confirm during installation:1. The rear bumper of the installed car is plastic.2. There must be no metal interference directly in front of the radar sensor (signal emission surface).3. The radar sensor (signal emission surface) cannot be installed facing the fluorescent lamp.
The list of items:
1Radar sensor 2Power cord3LED transconnection4LED indicator lightBlind area rear view lens5Steering and reversing inspection line6Calibration card7Radar bracket8Screw9buzzer10Instructions
Instructions for use:
*Universal products, LED lights are installed in the car A-pillar; special products, LED lights are installed in the blind area rear view lens* When reverse reversing, the system enters the interference-free mode without warning, so as not to interfere with the driver.1, left blind spot detection: When the moving vehicle approaches when the left rear blind zone (3~10M) is detected, the LED on the left rear view mirror lights up.2, right blind